Wall Packs – Commercial LED lighting | Industrial LED Lighting Solutions | DECO

LED Mini Wall Pack

Fabian — Thu, 21 Jul 2022 03:11:13 +0000

Fabian — Thu, 09 Dec 2021 18:17:58 +0000

Fabian — Thu, 09 Dec 2021 18:12:18 +0000

Fabian — Tue, 17 Aug 2021 18:52:36 +0000

Medium Trapezoidal Wall Pack

Fabian — Tue, 10 Aug 2021 18:49:58 +0000

Medium Trapezoidal Wall Pack

Fabian — Tue, 27 Oct 2020 21:46:13 +0000

Construction
- Low-profile die-cast aluminum LED fixture with hinged, removable door and back box. Available from 10W up to 80W. Three half-inch, NP threaded conduit entry points included in back box, which mounts to standard 3 1/2” to 4” round and octagonal, 4” square, single gang and masonry junction boxes. Key hole gasket adapts to j-box and wall. Silicone gasket seals the door and back box. Compliance to FDA/USDA requirements and/or NSF splash-zone certification. CSA Listed for Wet Locations – IP67
Optical
- Mirrored, anodized reflector located inside silicone-sealed optical chamber to provide maximum efficiency and high illumination. Impact-resistant tempered glass included in optical assembly, meeting IESNA requirements for full cutoff. Solid state LEDs thermally optimized with multiple lumen packages from a warm 3000K LED color temp to a cool 5000K (CCT).

Electrical
- 120-277V 50/60Hz. Heat sinking optimization due to LED driver mounted to fixture’s die-cast housing. Thermal management system uses conduction and natural convection to transfer heat away from LED source. Three half-inch NPT threaded conduit entry points allow thru-branch wiring and the back box is an authorized electrical wiring compartment. Vinci-LED luminaires maintain greater than 70% of initial light output after 120,000 hours of operation.
- Line-Line Surge Protection: 1kV (10W), 2kV (20W-30W), 4kV (50W-80W)
Finish
- The Vinci features a super durable DECO Guard carbon bronze powder coat finish which can withstand extreme climate conditions while still maintaining optimal color and gloss retention during the installed life of the fixture.

Fabian — Mon, 17 Sep 2018 21:15:05 +0000

Low-profile, sleek design provides a more modern aesthetic compared to traditional wall packs
Full cutoff light output reduces light pollution, delivering illumination only where it is needed most
Three housing sizes provide flexibility depending on the desired aesthetic

Available in 3000K (warm white), 4000K (neutral white) or 5000K (cool white) color temperatures
Optional FSP-211 motion sensor integrates directly into fixture housing
Performs at up to 120 lumens per watt
Type III short IES distribution

Marketing Department — Tue, 03 Jul 2018 16:56:40 +0000

Heavy duty two piece die cast aluminium housing is top hinged for ease of maintenance. Two captive stainless steel door fasteners.
1/2” threaded conduit entry with coin plug.
Weight: 7.7lbs (40W); 8.6lbs (60W)
Dark bronze polyester powder finish for excellent impact, corrosion and UV resistance.